Thermal Diffusion Extreme Carbide System (TD Coating) is a superior adhesion process which successfully applies a layer of vanadium carbide coating to metal adding long term, uniform and resilient anti-corrosion protection primarily for dies (forming, stamping and piercing) and extrusion tooling.
TD is the number one requested coating at SHTC. It performs exceptionally well on tool steels such as AISI D-2, AISI A-2, and AISI H-13.
At SHTC our treatment process controls thickness of this coating ensuring uniformity across the section (adding only 4 to 8 µm) thereby not compromising dimensions of a tool, die or part.
If you are looking for optimum performance and long term wear on all metal part, tooling and forming applications than make the investment and give us a call.
• Vanadium Carbide
• Molybdenum Disulfide
• MoS2 with Teflon
• Die Benching
• Coating Removal
• Post Heat Treat
• Diffusion bonded to surface
• High hardness HV3500-4200
• Ideal for metal stamping and metal forming
• Increase productivity
• Improve tool life
• Increased lubricity
• Increase cost savings
Thermal Diffusion Extreme Carbide System (TD Coating) is a superior adhesion process which successfully applies a layer of vanadium carbide coating to metal adding long term, uniform and resilient anti-corrosion protection primarily for dies (forming, stamping and piercing) and extrusion tooling. TD is the number one requested coating at Surface Heat Treat and Coating. It performs exceptionally well on tool steels such as AISI D-2, AISI A-2, and AISI H-13.
Diffusion Bonded to Surface
High Hardness HV3500-4200
Ideal for Metal Stamping and Metal Forming
Improve Tool Life
Increase Cost Savings
With over 5,000 lbs of furnace capacity, around the clock production and decades of experience Surface Heat Treat and Coatings can handle almost any sized heat treating job. Our vacuum furnaces meet all pyrometric requirements and are certified to the AMS 2750 standard guaranteeing temperature uniformity. Parts treated in a vacuum environment maintain dimensional stability, remain clean and free from contaminates, oxidation and decarburization.
Bright Clean Work
The benefits of Arcor® or Ferritic Nitrocarburizing surface treatment are many and include exceptional resistance to wear, seizure, scuffing, fatigue and corrosion. This non-toxic economical process is carried out at low temperatures mitigating part distortion and can be applied to most steels and cast iron. In most cases part surface wear and corrosion properties improve by 200%-1000% subsequent to treatment.
Considered one of the best case hardening heat treatment providers in North America, Surface Heat Treat and Coatings offers a cost effective fast turnaround solutions for surface hardening and improved part or component wear resistance. Similar to our Nitriding process (nitrogen infusion), salt pot carburizing increases strength by infusing carbon into the steel surface creating a case while retaining a lesser hardness in the core. Case depth or diffusion is process and steel dependent and can exceed .050” if required. This process is terrific for most carbon steel applications and is typically used for gears, pinions, wear plates and die forms.
Longer Component Life
Clean Finished Parts
At Surface Heat Treat and Coatings we continue to seek out innovative coating technologies to improve part performance and longevity for our Canadian and US based customers. Our newest edition Boronex Boronizing is the ultimate in protection providing unmatched resistance against wear and corrosion while outperforming most conventional coating and heat treatment methodologies.
Tool Making and Metal Forming
Plastic Injection Molding